Order fast

iglidur® X

iglidur® X: High-Tech Problem Solver

When it's hot, iglidur® X is the right solution. This is true both literally and figuratively, for instance with extreme chemicals. The interesting thing is the abrasion resistance actually increases at high temperatures.

Personal contact

Ask the product expert

Application examples

Variants

type S (metric sizes)	type F (metric sizes)	type T (metric sizes)	type S (inch sizes)

type F (inch sizes)	type T (inch sizes)


Part No. :
Shaft diameter d1 [mm]:
Bearing width b1 [mm]:
Outer diameter d2 [mm]:
d1-Tolerance min. [mm]:
d1-Tolerance max. [mm]:

(Dimension according to ISO 3547-1 and special dimensions)
Recommended tolerance for the installation:
- Housing bore H7
- Shaft h9
For b1, tolerance field h13 is applicable .

Chamfer depending on d1

d1 [mm]: Ø 1-6 Ø 6-12 Ø 12-30 Ø > 30

f [mm]: 0,3 0,5 0,8 1,2

With the selected part you'll arrive at:

PDF file Life time calculation 3D-CAD Samples and catalog order


Part No. :
Shaft diameter d1 [mm]:
Bearing width b1 [mm]:
Flange thickness b2 [mm]:
Outer diameter d2 [mm]:
Flange diameter d3 [mm]:
d1-Tolerance min. [mm]:
d1-Tolerance max. [mm]:

b1-Tolerance :	h13
b2-Tolerance :	-0,14
d3-Tolerance :	d13

(Dimension according to ISO 3547-1 and special dimensions)
Recommended tolerance for the installation:
- Housing bore H7
- Shaft h9

r = max. 0,5 mm

Chamfer depending on d1

d1 [mm]: Ø 1-6 Ø 6-12 Ø 12-30 Ø > 30

f [mm]: 0,3 0,5 0,8 1,2

With the selected part you'll arrive at:

PDF file Life time calculation 3D-CAD Samples and catalog order


Part No. :
Shaft diameter d1 [mm]:
Outer diameter d2 [mm]:
s [mm]:
d4 [mm]:
d5 [mm]:
d6 [mm]:
h [mm]:

d1-Tolerance :	+0,25
d2-Tolerance :	-0,25
d4-Tolerance :	+/- 0,2
d5-Tolerance :	+0,375/+0,125
d6-Tolerance :	+ 0,12
h-Tolerance :	+/- 0,2
s-Tolerance :	-0,05

(Dimension according to ISO 3547-1 and special dimensions)
Recommended tolerance for the installation:
- Shaft h9

With the selected part you'll arrive at:

PDF file Life time calculation 3D-CAD Samples and catalog order


Part No. :
Shaft diameter d1 [inch]:
Bearing width b1 [inch]:
Outer diameter d2 [inch]:
d1 MIN. [inch]:
d1 MAX. [inch]:
housing bore min. [inch]:
housing bore max. [inch]:
shaft dimension min. [inch]:
shaft dimension max. [inch]:

Chamfer depending on d1

d1 [mm]: Ø 1-6 Ø 6-12 Ø 12-30 Ø > 30

f [mm]: 0,3 0,5 0,8 1,2

With the selected part you'll arrive at:

PDF file Life time calculation 3D-CAD Samples and catalog order


Part No. :
Shaft diameter d1 [inch]:
Bearing width b1 [inch]:
Flange thickness b2 [inch]:
Outer diameter d2 [inch]:
Flange diameter d3 [inch]:
d1 MIN. [inch]:
d1 MAX. [inch]:
housing bore min. [inch]:
housing bore max. [inch]:
shaft dimension min. [inch]:
shaft dimension max. [inch]:

r = max. 0,5 mm

Chamfer depending on d1

d1 [mm]: Ø 1-6 Ø 6-12 Ø 12-30 Ø > 30

f [mm]: 0,3 0,5 0,8 1,2

With the selected part you'll arrive at:

PDF file Life time calculation 3D-CAD Samples and catalog order


Part No. :
Shaft diameter d1 [inch]:
Outer diameter d2 [inch]:
s [inch]:
d4 [inch]:
d5 [inch]:
d6 [inch]:
h [inch]:

d1-Tolerance :	+ .010
d2-Tolerance :	- .010
d4-Tolerance :	+/- .005
d5-Tolerance :	.015/+.005
d6-Tolerance :	+ .005
h-Tolerance :	+ .008
s-Tolerance :	- .0020

With the selected part you'll arrive at:

PDF file Life time calculation 3D-CAD Samples and catalog order

When to use iglidur® X bearings?

For pressure loads up to 150 MPa
For linear movements with stainless steel
For linear movements especially under high temperatures
When universal resistance to chemicals is called for
For temperature resistance from -100°C to +250°C (short-term up to +315°C)
For very low humidity absorption
For high wear resistance in both minus temperatures and high temperature range.

When not to use them?

When a low coefficient of wear is required at high load
iglidur® Q
iglidur® Z
For edge loads
iglidur® Z
When a low-priced bearing is required for underwater application
iglidur® H
iglidur® H370