iglidur® H: Resistant to Hydrolysis

Resistant to chemicals and suitable for temperatures up to 200°C. Very low coefficients of friction in association with hardened shafts.

Personal contact

Ask the product expert

Application examples

Variants

type S (metric sizes)

type F (metric sizes)


Part No. :
Shaft diameter d1 [mm]:
Bearing width b1 [mm]:
Outer diameter d2 [mm]:
d1-Tolerance min. [mm]:
d1-Tolerance max. [mm]:

(Dimension according to ISO 3547-1 and special dimensions)
Recommended tolerance for the installation:
- Housing bore H7
- Shaft h9
For b1, tolerance field h13 is applicable .

Chamfer depending on d1

d1 [mm]: Ø 1-6 Ø 6-12 Ø 12-30 Ø > 30

f [mm]: 0,3 0,5 0,8 1,2

With the selected part you'll arrive at:

PDF file Life time calculation 3D-CAD Samples and catalog order


Part No. :
Shaft diameter d1 [mm]:
Bearing width b1 [mm]:
Flange thickness b2 [mm]:
Outer diameter d2 [mm]:
Flange diameter d3 [mm]:
d1-Tolerance min. [mm]:
d1-Tolerance max. [mm]:

b1-Tolerance :	h13
b2-Tolerance :	-0,14
d3-Tolerance :	d13

(Dimension according to ISO 3547-1 and special dimensions)
Recommended tolerance for the installation:
- Housing bore H7
- Shaft h9

r = max. 0,5 mm

Chamfer depending on d1

d1 [mm]: Ø 1-6 Ø 6-12 Ø 12-30 Ø > 30

f [mm]: 0,3 0,5 0,8 1,2

With the selected part you'll arrive at:

PDF file Life time calculation 3D-CAD Samples and catalog order

When to use iglidur® H bearings?

For underwater application
When it is dependent on high temperature resistance
For high mechanical load
For application in contact with chemicals

When not to use them?

When extremely high wear resistance under water is required
iglidur® H370
When the best universal resistance to chemicals is required
iglidur® X
For maximum compressive strength at higher temperatures
iglidur® X
iglidur® Z