Order fast

iglidur® Q

iglidur® Q: Fit to cope with high loads

iglidur® Q is the low priced solution for high holding times at high to extreme loads. Bearing made from this material suits all types of movements, but is used preferentially in oscillating motions.

Personal contact

Ask the product expert

Application examples

Variants

type S (metric sizes)	type F (metric sizes)	type S (inch sizes)

type F (inch sizes)


Part No. :
Shaft diameter d1 [mm]:
Bearing width b1 [mm]:
Outer diameter d2 [mm]:
d1-Tolerance min. [mm]:
d1-Tolerance max. [mm]:

(Dimension according to ISO 3547-1 and special dimensions)
Recommended tolerance for the installation:
- Housing bore H7
- Shaft h9
For b1, tolerance field h13 is applicable .

Chamfer depending on d1

d1 [mm]: Ø 1-6 Ø 6-12 Ø 12-30 Ø > 30

f [mm]: 0,3 0,5 0,8 1,2

With the selected part you'll arrive at:

PDF file Life time calculation 3D-CAD Samples and catalog order


Part No. :
Shaft diameter d1 [mm]:
Bearing width b1 [mm]:
Flange thickness b2 [mm]:
Outer diameter d2 [mm]:
Flange diameter d3 [mm]:
d1-Tolerance min. [mm]:
d1-Tolerance max. [mm]:

b1-Tolerance :	h13
b2-Tolerance :	-0,14
d3-Tolerance :	d13

(Dimension according to ISO 3547-1 and special dimensions)
Recommended tolerance for the installation:
- Housing bore H7
- Shaft h9

r = max. 0,5 mm

Chamfer depending on d1

d1 [mm]: Ø 1-6 Ø 6-12 Ø 12-30 Ø > 30

f [mm]: 0,3 0,5 0,8 1,2

With the selected part you'll arrive at:

PDF file Life time calculation 3D-CAD Samples and catalog order


Part No. :
d1 [mm]:
d2 [mm]:
s [mm]:
d4 [mm]:
d5 [mm]:
d6 [mm]:
h [mm]:

d1-Tolerance :	+ 0,3
d2-Tolerance :	- 0,3
d4-Tolerance :	+/- 0,12
d5-Tolerance :	+ 0,375 / + 0,125
d6-Tolerance :	+ 0,12
h-Tolerance :	+/- 0,2
s-Tolerance :	-0,05

With the selected part you'll arrive at:

PDF file Life time calculation 3D-CAD Samples and catalog order

GToB Imprint


Part No. :
Shaft diameter d1 [inch]:
Bearing width b1 [inch]:
Outer diameter d2 [inch]:
d1 MIN. [inch]:
d1 MAX. [inch]:
housing bore min. [inch]:
housing bore max. [inch]:
shaft dimension min. [inch]:
shaft dimension max. [inch]:

Chamfer depending on d1

d1 [mm]: Ø 1-6 Ø 6-12 Ø 12-30 Ø > 30

f [mm]: 0,3 0,5 0,8 1,2

With the selected part you'll arrive at:

PDF file Life time calculation 3D-CAD Samples and catalog order


Part No. :
Shaft diameter d1 [inch]:
Bearing width b1 [inch]:
Flange thickness b2 [inch]:
Outer diameter d2 [inch]:
Flange diameter d3 [inch]:
d1 MIN. [inch]:
d1 MAX. [inch]:
housing bore min. [inch]:
housing bore max. [inch]:
shaft dimension min. [inch]:
shaft dimension max. [inch]:

r = max. 0,5 mm

Chamfer depending on d1

d1 [mm]: Ø 1-6 Ø 6-12 Ø 12-30 Ø > 30

f [mm]: 0,3 0,5 0,8 1,2

With the selected part you'll arrive at:

PDF file Life time calculation 3D-CAD Samples and catalog order

When to use iglidur® Q bearings?

For oscillating applications
For excellent abrasion resistance, especially at extreme loads
For extreme p x v values
For maintenance-free dry operation
When the bearing should be insensitive to dirt
For insensitivity to edge loads

When not to use them?

When the bearings are used under water
iglidur® H370
When constant temperatures of more than 135°C are present
iglidur® H
iglidur® X
iglidur® Z
When electrically conductive bearings are needed
iglidur® H
iglidur® F