Order fast

iglidur® J

iglidur® J: The fast and slow motion specialist

The perfect combination of wear-resistant bearings at low to medium loads and best coefficients of friction. Extreme dimension stability even in moist applications.

Personal contact

Ask the product expert

Application examples

Variants

type S (metric sizes)	type F (metric sizes)	type T (metric sizes)	type S (inch sizes)

type F (inch sizes)


Part No. :
Shaft diameter d1 [mm]:
Bearing width b1 [mm]:
Outer diameter d2 [mm]:
d1-Tolerance min. [mm]:
d1-Tolerance max. [mm]:

(Dimension according to ISO 3547-1 and special dimensions) Recommended tolerance for the installation: Housing bore H7, Shaft h9. The tolerance for d1 is applicable for bearings that are press-fitted in a steel housing bore in the nominal dimension H7. For b1, tolerance field h13 is applicable .

Chamfer depending on d1

d1 [mm]: Ø 1-6 Ø 6-12 Ø 12-30 Ø > 30

f [mm]: 0,3 0,5 0,8 1,2

With the selected part you'll arrive at:

PDF file Life time calculation 3D-CAD Samples and catalog order


Part No. :
Shaft diameter d1 [mm]:
Bearing width b1 [mm]:
Flange thickness b2 [mm]:
Outer diameter d2 [mm]:
Flange diameter d3 [mm]:
d1-Tolerance min. [mm]:
d1-Tolerance max. [mm]:

b1-Tolerance :	h13
b2-Tolerance :	-0,14
d3-Tolerance :	d13

(Dimension according to ISO 3547-1 and special dimensions) Recommended tolerance for the installation: Housing bore H7, Shaft h9. Tolerance field for d1 after the force-fitting in H7 housing bore. Tolerance field d13 is applicable for d3, tolerance field h13 for b1 and tolerance -0.14 for b2.

r = max. 0,5 mm

Chamfer depending on d1

d1 [mm]: Ø 1-6 Ø 6-12 Ø 12-30 Ø > 30

f [mm]: 0,3 0,5 0,8 1,2

With the selected part you'll arrive at:

PDF file Life time calculation 3D-CAD Samples and catalog order


Part No. :
d1 [mm]:
d2 [mm]:
s [mm]:
d4 [mm]:
d5 [mm]:
d6 [mm]:
h [mm]:

d1-Tolerance :	+ 0,3
d2-Tolerance :	- 0,3
d4-Tolerance :	+/- 0,12
d5-Tolerance :	+ 0,375 / + 0,125
d6-Tolerance :	+ 0,12
h-Tolerance :	+/- 0,2
s-Tolerance :	-0,05

Dimensions according to ISO 3547-1 and special dimensions

With the selected part you'll arrive at:

PDF file Life time calculation 3D-CAD Samples and catalog order


Part No. :
Shaft diameter d1 [inch]:
Bearing width b1 [inch]:
Outer diameter d2 [inch]:
d1 MIN. [inch]:
d1 MAX. [inch]:
housing bore min. [inch]:
housing bore max. [inch]:
shaft dimension min. [inch]:
shaft dimension max. [inch]:

Chamfer depending on d1

d1 [mm]: Ø 1-6 Ø 6-12 Ø 12-30 Ø > 30

f [mm]: 0,3 0,5 0,8 1,2

With the selected part you'll arrive at:

PDF file Life time calculation 3D-CAD Samples and catalog order


Part No. :
Shaft diameter d1 [inch]:
Bearing width b1 [inch]:
Flange thickness b2 [inch]:
Outer diameter d2 [inch]:
Flange diameter d3 [inch]:
d1 MIN. [inch]:
d1 MAX. [inch]:
housing bore min. [inch]:
housing bore max. [inch]:
shaft dimension min. [inch]:
shaft dimension max. [inch]:

r = max. 0,5 mm

Chamfer depending on d1

d1 [mm]: Ø 1-6 Ø 6-12 Ø 12-30 Ø > 30

f [mm]: 0,3 0,5 0,8 1,2

With the selected part you'll arrive at:

PDF file Life time calculation 3D-CAD Samples and catalog order

When to use iglidur® J bearings?

For high speeds
When extremely high wear resistance at low to medium pressure loads is sought
When minimum wear of a number of different shafts is required
When low coefficients of friction are desired in dry operation
When the bearing should be vibration dampening
When good resistance to chemicals is required
When low moisture absorption is required

When not to use them?

When high pressure loads occur
iglidur® G
iglidur® W300
When short-term temperatures of more than 120°C occur
iglidur® G
iglidur® Z
When a cost-efficient bearing is sought to undertake occasional movements
iglidur® G