iglidur® clips2 - Fit for high loads

Easy-to-mount clip-type plain bearing made from our proven and tested iglidur® M250 material. The chamfered slot compensates for the housing tolerances and enables low bearing clearance and easy installation.

Special features

Low bearing clearance, very accurate

Simple mounting through chamfered slot

Material: iglidur® M250

Maintenance-free and calculable service life

 
Materials table

General features Unit iglidur® M250 test method
Density g/cm³ 1,14
Paint Anthracite
Max. humidity absorption at 23°C/50% RD weight-% Gew.-% 1,4 DIN 53495
Max. water absorption Gew.-% 7,6
Coefficient of surface friction, dynamic, against steel µ 0,18 - 0,40
P x v value, max. (dry) MPa x m/s 0,12

Mechanical properties
Bending E-module MPa 2.700 DIN 53457
Bending strength at 20° C MPa 112 DIN 53452
compressive strength MPa 52
Maximum recommended surface pressure (20° C) MPa 20
Shore D hardness 79 DIN 53505

Physical and thermal properties
Upper long-term application temperature °C 88
Upper short-term application temperature °C 170
Lower application temperature °C -40
heat conductance [W/m x K] 0,24 ASTM C 177
Coefficient of thermal expansion (at 23° C) [K-1 x 10-5] 10 DIN 53752

Electrical properties
Specific forward resistance Ωcm > 1013 DIN IEC 93
Surface resistance Ω > 1011 DIN 53482

 
 

iglidur® - clip bearing, metric

Part No.:
d1 [mm]:
Dimensions [mm]
Part no. d1 d1* d2** d3 d3 b1 b1 b2 b2    
    Tolerance     Tolerance   Tolerance   Tolerance    
 MYM-04-04 4 +0,025/+0,075 5,2 7,0 +/- 0,40 4 -0,40 0,6 -0,13 Upon request 
 MYM-05-05 5 +0,025/+0,075 6,2 8,0 +/- 0,40 5 -0,40 0,6 -0,13 Upon request 
 MYM-06-06 6 +0,025/+0,075 7,2 9,5 +/- 0,40 6 -0,40 0,6 -0,13 Upon request 
 MYM-08-08 8 +0,025/+0,075 9,6 12,0 +/- 0,40 8 -0,40 0,8 -0,13 Upon request 
 MYM-10-10 10 +0,025/+0,075 11,6 15,0 +/- 0,40 10 -0,40 0,8 -0,13 Upon request 
 MYM-12-12 12 +0,025/+0,075 13,6 18,0 +/- 0,40 12 -0,40 0,8 -0,13 Upon request 
 MYM-14-14 14 +0,025/+0,075 15,6 21,0 +/- 0,40 14 -0,40 0,8 -0,13 Upon request 
 MYM-16-16 16 +0,025/+0,075 17,6 24,0 +/- 0,40 16 -0,40 0,8 -0,13 Upon request 
 MYM-20-20 20 +0,025/+0,075 21,6 30,0 +/- 0,40 20 -0,40 0,8 -0,13 Upon request 
 MYM-25-25 25 +0,025/+0,075 27,4 37,5 +/- 0,40 25 -0,40 1,2 -0,13 Upon request 
More about selected part:
3D-CAD Sample request PDF Quote request Price list
*d1 is checked with gage, joinable/not joinable after the insertion in test housing with d2 (+0.005).
** Recommended tolerance of the housing bore: h9

iglidur® clip bearing, inch

Part No.:
b1 [inch]:
Dimensions in inches
Part No. d1 Shaft
diameter		 d2 Housing
bore		 d3 b1 b1 b2    
    min. max.   min. max.     tolerance      
 MYI-03-03 3/16 0,1875 0,1865 0,2339 0,2351 0,2339 19/61 3/16 -0,016 0,0252 Upon request 
 MYI-04-04 1/4 0,0024 0,249 0,2965 0,2979 0,2965 13/32 1/4 -0,016 0,0252 Upon request 
 MYI-05-05 5/16 0,3125 0,3115 0,3744 0,3758 0,3744 1/2 5/16 -0,017 0,0299 Upon request 
 MYI-06-06 3/8 0,375 0,374 0,4370 0,4387 0,4370 19/32 3/8 -0,017 0,0299 Upon request 
 MYI-07-07 7/16 0,4375 0,4365 0,4996 0,5013 0,4996 21/32 7/16 -0,017 0,0299 Upon request 
 MYI-08-06 1/2 0,5 0,499 0,5618 0,5635 0,5618 3/8 3/4 -0,018 0,0299 Upon request 
 MYI-08-08 1/2 0,5 0,499 0,5618 0,5635 0,5618 3/4 1/2 -0,018 0,0299 Upon request 
 MYI-10-07 5/8 0,625 0,624 0,6870 0,6887 0,6870 15/16 7/16 -0,018 0,0299 Upon request 
 MYI-10-10 5/8 0,625 0,624 0,6870 0,6887 0,6870 15/16 5/8 -0,018 0,0299 Upon request 
 MYI-10-18 5/8 0,625 0,624 0,6870 0,6887 0,6870 15/16 1 1/8 -0,018 0,0299 Upon request 
 MYI-12-12 3/4 0,75 0,749 0,8118 0,8139 0,8118 1 1/8 3/4 -0,019 0,0299 Upon request 
 MYI-12-18 3/4 0,75 0,749 0,8118 0,8139 0,8118 1 1/8 1 1/8 -0,019 0,0299 Upon request 
 MYI-14-7,5 7/8 0,875 0,874 0,9370 0,9391 0,9370 1 5/16 15/32 -0,019 0,0299 Upon request 
 MYI-14-14 7/8 0,875 0,874 0,9370 0,9391 0,9370 1 5/16 7/8 -0,019 0,0299 Upon request 
 MYI-16-14 1 1 0,9985 1,0933 1,0954 1,0933 1 1/2 7/8 -0,020 0,0449 Upon request 
 MYI-16-16 1 1 0,9985 1,0933 1,0954 1,0933 1 1 -0,020 0,0449 Upon request 
More about selected part:
3D-CAD Sample request PDF Quote request Price list
igus® (UK) Ltd.
51 Caswell Road
Brackmills
Northampton
NN4 7PW

igus® contactTel: +44(0)1604 677240
Fax:+44(0)1604 677242 Send e-mail to igus®

myigus

3D-CADOnline catalogNews 2010Product finderProduct finder for semi-finished productsLifetime calculationApplication examplesEmail the product expertInquiry/orderQuickSpecPart No. searchShaft inquiryCatalogs/samplesDownloadmanus® Competition

More than 80,000 products available! Delivery and consultation Mon-Fri from 8am-8pm and Sat from 8am-12pm!

Newsletter Registration

Email: Send

Terms and Conditions Imprint